|
|
#2
10-05-2019, 05:36 PM
|
|||
|
|||
Should look very similar to my 1979 fuel hatch. Balsam wood cored. Score the underside of hatch with a circular saw set to correct depth, and go around the perimeter, without cutting glass sides/edges. Then lessen depth and cross score entire underside, making smaller blocks to chisel out/remove wet core. Not all that bad. Had it recored during the refurb with Coosa, or similar foam board. Hope that helps.
Vezo, Part II 
|
|
|
Threaded Mode