Got a buncha glassing done... Splashwell all tied in, top of decks done, still need tabbed underneath and the foredeck will get its 2nd layer after i glass the toerails. Put some carbon on the foredeck just to make it not so trampoline-y, thats a big area and i dont want to put beams underneath... For the record and anyone watching, it would be much more effective on the bottom side, and i could get away with alot less but i wasnt given some carbon before i layed up the bottom hehe. There is some uni glass on the bottom though...
Cut some access too. Went back and forth on a top hatch or rear opening on the forward bulkhead. Bulkhead is tall enough to get in there real easily and saved alotta wprk doing it that way so... Need to make some gutters/flanges for the rear hatch now.
Untitled by
dirtwheelsfl, on Flickr
Untitled by
dirtwheelsfl, on Flickr
Untitled by
dirtwheelsfl, on Flickr
Untitled by
dirtwheelsfl, on Flickr
Untitled by
dirtwheelsfl, on Flickr
Untitled by
dirtwheelsfl, on Flickr
The bottom of the combing gets foam taken out and epoxy filled. The backside of it was rounded over and glassed when the bottom side was done. Really ties the skins together and that spot is always getting beat up.
Untitled by
dirtwheelsfl, on Flickr
03-11-2020, 07:15 PM
Threaded Mode