19 sternrider

[flyingfrizzle]

Originally Posted by dirtwheelsfl

hopefully itll get rid of some of the original roving print thru.

Good luck with that, The print threw is a pain to get gone. On one of my old hulls I sanded into the gel fairly hard with 120 grit with a Hutchins line sander and then added 5 layers of 2000e primer (grey and then white back and forth to be able to see high spots or the roven) blocking down between the layers of primer trying to get the roven print threw out. About 2 years latter it started to show up again slightly. I should of did like you and removed all the gel completely.