Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 01-16-2022, 08:09 AM
cdavisdb cdavisdb is offline
Senior Member
 
Join Date: Feb 2006
Location: Sarasota, FL
Posts: 1,056
Default

I put a vacuum gauge on my 25 at Bushwacker's suggestion. Best, most useful gauge I had.

On the oil temp gauge: My 300 hp Volvo 5.7 did not come with an oil cooler. I put one on(and an oil temp gauge) before I started using it and the oil temp was still on the high side. Stay above 7 inches of vacuum(to keep the exhaust valves from burning) and all was fine, but not if I exceeded that vacuum. For sure, that engine would have been running too hot without a cooler.

Running too hot on oil temp once cost me an engine, so I'm a bit sensitive to that issue.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:46 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft