Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-18-2003, 02:35 AM
bjfg144 bjfg144 is offline
Member
 
Join Date: Nov 2003
Location: Delray Beach,Florida
Posts: 35
Default Re: "THE VORTEX"

fellowship,
Buy a cheapy kodak camera. When you get it developed, ask them to put the pictures on a c/d(the lab will do it for you at an extra cost of 5 ish dollars). then you can put c/d in your computer. works like a digital, you can enhance, crop, lighten and darken too. all the instructions come with the disk. its easy.
__________________
John
Reply With Quote
  #2  
Old 11-18-2003, 06:31 PM
John R John R is offline
Senior Member
 
Join Date: Feb 2002
Location: Narragansett Bay
Posts: 1,374
Default Re: "THE VORTEX"

Grins & giggles for you digital camera phobes... You can pick up something cheap on Ebay, or look at something like a cheap refurbished for relatively short coin: http://www.compgeeks.com/details.asp?invtid=DX3215-R

Or new for $95 http://www.buy.com/retail/product.as...7792&loc=13174

None of these are even close to high end but should be somewhat easy to use and damn near disposable if you drop it in the drink
__________________
Surf and Boat fishing for
Striped Bass

http://striped-bass.com/images/sb_small180b.gif
Reply With Quote
  #3  
Old 11-19-2003, 11:22 AM
Dave Hirshberg Dave Hirshberg is offline
Senior Member
 
Join Date: May 2003
Location: Fort Myers FL
Posts: 342
Default Re: "THE VORTEX"

Fellow Ship,
Dude , you got waaayyy too much time on your hands.
ditto on the picture posting, I'm comletely lost. The mental picture I'm getting on the "Vortex" is geting confusing with all the baloons, condoms,gloves, pipe and O rings. I'm a touchy feely guy. I gotta see pics..
Good R&D!! Edison would be proud.
Reply With Quote
  #4  
Old 11-19-2003, 03:10 PM
ocuyler ocuyler is offline
Senior Member
 
Join Date: May 2002
Location: 44.41 -75.79
Posts: 1,490
Default Re: "THE VORTEX"

I had a girlfriend once that they called "vortex"...
__________________
Otto
And yes, I still believe in the four boat theory...
Reply With Quote
  #5  
Old 11-19-2003, 03:50 PM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: "THE VORTEX"

I will take a few pictures and try to post them this coming week.
FellowShip [img]images/icons/wink.gif[/img]
Reply With Quote
  #6  
Old 11-20-2003, 10:37 PM
TUGBOAT TUGBOAT is offline
Senior Member
 
Join Date: Sep 2002
Location: Homestead~Now-Melbourne Fl.
Posts: 1,052
Default Re: "THE VORTEX"

Went to Our local Wal-Mart Last Nite. 100 photo's from Your negatives made into a cd $3.84 Then mail it, e-mail it, Keep it forever !
Will this "VorteX" work on the Horizontal Drains ?20' MA.
__________________
http://www.frenzie.com/frenzielogoline.GIF

www.frenzie.com

http://www.frenzie.com/custom.htm
"Classic SeaCraft" Lures


1983_seacraft_master_angler.]htm



My wife and I had words,
But I didn't get to use mine."?"


Reply With Quote
  #7  
Old 11-21-2003, 04:58 PM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: "THE VORTEX"

Ha Capt. Brad
There are a number of good horizontal devices on the market that all work pretty good “THE VORTEX” was designed for the guys that have the vertical scuppers with water shooting up and onto the deck. Although they probably would work just as good as the rest of those devices on the market. I would say if you do try them in your horizontal scuppers that run through the transom of your boat please reframe from using the Trojan collapsible diaphragm ones. Most SeaCraft owners take pride in their project boats and I think that if people saw two Trojans hanging out your transom as you pull your boat up and out of the boat ramp area at your local marina it could present a image that would not truly represent the majority of us Classic SeaCraft boat lovers.
FellowShip [img]images/icons/shocked.gif[/img]
Reply With Quote
  #8  
Old 06-14-2006, 07:22 PM
eggsuckindog eggsuckindog is offline
Senior Member
 
Join Date: Mar 2003
Location: Tampa
Posts: 2,354
Default Re: \"THE VORTEX\"

JUst got my material from HD, all I need is the cups now but its very simple, the # 436 005 makes it very simple to find the correct part. I had to get O rings 7/8 X 11/16 X 3/32 # 13's but they look like they will do fine. Film at 11
__________________
Any way you measure it - dumbass is expensive
Reply With Quote
  #9  
Old 06-15-2006, 06:05 PM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: \"THE VORTEX\"

DON’T FOR GET THE BEER.

FellowShip

_______________________________________________

My motto: Just for the Grins
Reply With Quote
  #10  
Old 06-16-2006, 10:31 PM
Blue197320 Blue197320 is offline
Senior Member
 
Join Date: Mar 2006
Location: Miami Fl
Posts: 947
Default Re: \"THE VORTEX\"

guys,
i am having a VERY hard time trying to figure this thing out. i think i need some better pics or something. would some one be kind enough to help me out with this. thank you
-Evan
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:14 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft