Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-26-2002, 01:19 AM
Reel Smoker Reel Smoker is offline
Senior Member
 
Join Date: Apr 2002
Location: Key West
Posts: 318
Default Re: console sizes

OK, Im confused here.Is the small console the one that comes with the seat built in.Correct me if im wrong the large console does'nt come with a seat but has the large door that gives you access to the bottom of the console? I was told that the hatch underneath the console was used to hold a toilet? Thanks RS.
Reply With Quote
  #2  
Old 04-26-2002, 01:53 AM
Scott Scott is offline
Senior Member
 
Join Date: Feb 2002
Posts: 1,272
Default Re: console sizes

RS

Your right about the consoles....The smaller one has the seat molded into the console and I believe is a little shorter in overall hieght. Take a look at Bill Sirotnak's pictures. The larger console does have a large door in front of the console that opens and exposes the entire backside of the dash and inside of the console. On that door is a molded in seat. (I also received with my boat a flat door with no seat....which I like alot as it gives me a little more room up front). In the console I believe that there were different setups. Again mine, 1976, does not have a hatch that exposes the bilge area. I just have a flat deck inside the console. I'm planning on either moving the fuel tank a little bit forward into that area or putting a removable hatch in there for added storage. Right now its a 30" x 30" hole thats not being used....I'll fix that [img]images/icons/grin.gif[/img]

Hope this clears up you question
Scott
Reply With Quote
  #3  
Old 04-27-2002, 10:18 AM
Reel Smoker Reel Smoker is offline
Senior Member
 
Join Date: Apr 2002
Location: Key West
Posts: 318
Default Re: console sizes

Thanks Scott,I have the big one, which I cut in half that way I can open the top part for quick access inside.I use a cooler in the front of it as a seat.Prior to cutting the door I would have to move the heavy cooler ,now its alot easier. RS.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft