stringers

[FELLOW-SHIP]

THE INSIDE WALL OF THE STRINGERS (FROM THE BOW TO THE END OF THE HATCH THAT COVERS THE GAS TANK) ARE APPROX 30” APART/ WIDE OR ABOUT ¼” TO ½ “ WIDER THAN THAT LARGE DECK HATCH. EACH GLASS STRINGER IS ABOUT 3 ” OR SO THICK AND FULL OF FOAM THE THICKNESS OF THE GLASS STRINGERS IS ABOUT ¼” THICK AND REALLY NOT SUITABLE TO MOUNT ANY HARDWARE. WHEN YOU GO FURTHER BACK TOWARDS THE TRANSOM THEY ARE MUCH WIDER YOU COULD MEASURE THAT BY USING A TAPE MEASURE IN SIDE THE BILGE ACCESS HATCHES. ON MY LEANING POST THE WITH OF THE LEGS WERE PAST THE 30” DECK HATCH BUT SINCE I RE DID MY DECK WITH ½” MARINE PLYWOOD AND PLENTY OF GLASS I WAS ABLE TO MOUNT MY SEAT WITH NO PROBLEMS. IF YOU HAVE A OLDER POTTER BUILT THERE PROBABLY IS ONE ROW OF 3/8” THICK 6”X6” SQUARES OF PLYWOOD ALONG THE DECK JUST OUTWARD PORT AND STARBOARD FROM THAT DECK PANNELL THAT GOES ALL THE WAY TO THE TRANSOM AREA.
FELLOWSHIP [img]images/icons/cool.gif[/img]