Need a source for thru hulls

[Jon G]

Guys I need a source for a couple of thru hulls for my two bilge pumps. I need 1 1/8 by 90 degree fittings. I want to put them up in front of the SeaCraft lettering to get them as high as posssible but I have limited room between the liner and the outside hull. I found a nice fitting made by Orca but I measured tonight and its slightly to long to fit. These fittings were a nylon/glass with the stainless on the outside. I'd rather to with metal versus plastic but I'll take anything to get the boat in the water. Any ideas?