Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 03-23-2004, 07:13 PM
codfeesh codfeesh is offline
Member
 
Join Date: Jan 2004
Location: westport ma
Posts: 35
Default Re: deck repair question

fellow ship,in this post i get that you removed the whole upper skin on your deck and replaced all the wood ...then reglassed or used the same skin?here is what im dealing with..i had a soft spot on the side of my motor box so i cut out the piece that was soft and found it was much worse than i had expected.i cut out another piece and some spots were like mud..its a 3/8 inch balsa core...but im thinking of tearing up the whole thing...now i left about 2.5 inches around the sides should i do this the whole deck and tear out all the wood..maybe you could explain your process to me ...i would aprieciate it..

thanks jeff
1974 23 cc i/o
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:24 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft