Re-Attach Deck to Stringers

[FELLOW-SHIP]

Ha Dink
I first cleared out all the loose pieces and then cleaned (as best as I could) with acetone removing all dirt and what not then I did three things I trawled thickened epoxy in from the sides and then I drilled small holes from the top and injected thickened epoxy in from the top using a syringe. Then I glassed the 90 degree angle from the stringer to the bottom on the deck which also helped support the lip for the gas tank deck plate. It worked for me.
FellowShip [img]/images/graemlins/grin.gif[/img]