![]() |
|
#1
|
|||
|
|||
![]() There is always using Duratec as a 'thinner' added w/ the gelcoat. However, I am not that familiar with it. A lot of the pros use it around here.. It helps the spray lay down smoother. |
#2
|
|||
|
|||
![]()
Even with the use of Duratec as a thinner, a pressure pot sprayer should be used. Getting gelcoat down to a viscosity suitable for conventional spray equipment is risky. Many problems can be caused by over thinning gelcoat.
Bill |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|