Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 04-05-2005, 10:23 AM
Coyote Coyote is offline
Junior Member
 
Join Date: Feb 2003
Location: Blythe Island,Ga.
Posts: 21
Default Re: 200 hpdi on a 18

Hello Art,
I have the 18ft. with a 93 200 Merc. with the 25in. shaft
that the book says weighs 407lbs.With a 4 bladed ss prop
Iam sure it weighs around 415lbs.I have always had to plug
my scuppers to stop the water from getting in. Moving the
batteries under the console did not help any. I have a 17gal. above deck livewell in front of the motor that I
want to move under the front seat of the console. Iam hoping
when full and nobody in the boat this will at least let the
rain water go through the scuppers when docked.But what Mark
said about having to raise the deck is the only way you are
going to get the scuppers to be self bailing. Also what Mark
said the 200 will push the 18 along QUITE NICELY.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft