Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 04-19-2005, 06:22 PM
Scott Scott is offline
Senior Member
 
Join Date: Feb 2002
Posts: 1,272
Default Re: Waterline and bottom paint

Following the chin up in the bow is fine but don’t do it aft

I’m sure your aware (and probably have already done this)To attain the proper water line you need to load the boat as you would for use (including full fuel and water etc etc) and put it in the water. Either let it set in the water for some time to mark it naturally (scum line) or mark it with some thing like a grease pencil.

Every boat sits different in the water when loaded. This is an example why not to follow the chin all the way aft. Nothing worse than spending time on a boot only to find out its below or not parallel to the waters surface (the sweep up to the bow is fine)

Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft