Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 12-01-2005, 09:29 AM
dcobbett dcobbett is offline
Senior Member
 
Join Date: Nov 2004
Location: Swampscott, MA
Posts: 299
Default Re: Raising transom to 25\"

Ed,

Thanks for the information. Jay and Walter at J&W have been taking care of my current Suzuki for the last 2 years and we have talked this fall about a new 140 or a 115 on a SeaCraft. I know Derek and Nate quite well and am aware of how please they are with their engines. It's the weight factor that has me concerned; I think Seafari's tend to be bow heavy which may offset the 420+/- pound son engine, the deck in Trayder's hull has been raised plus the hull is very light, and Mark, I think, will be the first to say that what makes the 140 Suzuki viable on his modified 20 is the fact that he raised the deck.

An example of how good the 140 is. I fished with a friend from M'head last season. He has a 140 on the back of a 1975 22-2 Aquasport. Left Marblehead looking for SBFT's. Did the chase around the dump, the B and BF buoys, down to and well east of the H, worked back to the BF, and from there back to M'head @5,100-5,300 RPM (32mph+ on the GPS)just to blow it out a bit, all on 14.6 gal of gas.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft