![]() |
#19
|
|||
|
|||
![]()
I was thinking about foam on the clean up I mentioned above.. [img]/forum/images/graemlins/tongue.gif[/img] [img]/forum/images/graemlins/tongue.gif[/img]
When I mixed up cabosil and resin I would use a stuck and scrape of the extra that is in the mixer, then stick the mixer down in a big can and hit the trigger in the drill. The spinning takes the majority of it off. Then a good cleaning with a rad and acetone gets the rest. |
Thread Tools | Search this Thread |
Display Modes | |
|
|