S.Fla Seacraft Owners Fishing Tournament

[nestorpr]

This is what Noahsark wrote before:


After giving it some thought this is what I am thinking, feedback please!!

Alright fellas in the spirit of keeping it real & simple the tournament date would be June 10th, the entry fee per boat would be $50.00, & the breakdown is as follows.

$35.00 per boat will go into the prize money.

$10.00 per boat will go into covering the cost for the after party BBQ (Anglers Only or family?)if family we need to re-visit it then.

$5.00 per boat will be used to donate to our awesome web-site, after all its because of it that we even have the opurtunity to do this

I was thinking that for the BBQ we would again keeping it simple p/u burgers, dogs, chips, soda, & water. I know its not much but this is the one part that can get expensive really fast. If for some miraculous reason there is money left over that is designated for the BBQ it will be put into the prize money pot.

One last thing, it would be if we had a couple of guys step and help out with being in charge of coordinating the food for the BBQ. Let me know what you think!

Please send him your feedback on this.

[nestorpr]

My outdrive is ready to be re-installed and we're just working on the trim system now. Then I'll tackle the wood side panels (I'm replacing them with Plasteak or Starboard). Hopefully that will be finished before the tournament. If not I'll be fishing her anyway.

[jorgeinmiami]

maybe I can hitch a ride with you that day if I'm still boatless?

Let me know if there is room

Jorge

[nestorpr]

No problem, if the side panels aren't done by then you can help me keep all the boat's guts in! Ha!

[jorgeinmiami]

I'll bring the beer and some crazy glue

[nestorpr]

Sounds good! I just got the last few parts for the boat's tilt/trim system and will put them in tomorrow. Hopefully I'll be able to take her out on Sunday, if not tomorrow afternoon.

[nestorpr]

OK, the drive's been resealed, U-Joints replaced and has been installed, the tilt/trim motor is now on an aluminum bracket and operating. Not much was left of the old steel bracket, hell the solenoids were just hanging by the wires! Both T/T cylinders have been rebuilt and the carb also. This weekend I'll re-tune the engine and see how everything works. $600 in the hole already! Hopefully everything will be OK to be ready for June!