|
|
#23
04-13-2006, 01:03 PM
|
|||
|
|||
Re: plug lining
Puckyuck - I took a deep well socket (I think 3/4 inch) it was the exact outside diameter of the brass tube.
Carefully grind the flare off the old tube on the side that is easiest to access - then tap the old one out with the deep well socket. It worked for me
__________________
"Anything you let a dog do, you're training it to do." - 1977 23' Superfish ST250x Yam 
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Threaded Mode