Yet Another Transom Job in the Works - ?ions

[Fishjack]

dcobbett - I am keeping the thickness of the fairing to a minimum. System Three recommends at least 2 coats of epoxy resin over the final layer of fairing.

I plan on tinting some of the RAKA epoxy red and rolling it over the quickfair when I finish. Then will lightly sand and prep for paint. Will roll and tip the paint (like the rest of the boat) with Signature Finish.

If you (or anyone) suspects that I might have problems with this plan (skim coat cracking etc.) please let me know.

Thanks