Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 07-24-2006, 10:59 PM
salvagefirst salvagefirst is offline
Member
 
Join Date: Feb 2005
Posts: 82
Default Re: Limber Me Timbers

Been there Done that, My boat is an 89 23cc. There are no drains in the stringers all they done was put a 3in notch in the stringers at the transom, it will still hold 3 0r more gallons on each side. remove the console,center hatch,fuel tank, and you will find where the stringers are coming loose from the hull,Also where the water is standing on the outside of the stringers it seeps thru the glass into the transom.Had my transom checked by a pro,said it was good, when i got into the transom there was no wood left. They really use alot of glass in the transoms. There are alot of pics if you look up( salvagefirst 23) posted on 3/26/05, it will show you everything that you may run in to. Good Luck, Les
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft