Any Moesly 19' or 20' CCs out there?

[gigolot]

I have a 69 bow rider that I am working on. Converting it from an OMC I/O to an outboard. Transom was rotten on the port side but solid on the starboard side. Stringers appear to be solid but I didn't take the floor up. I am putting a 115 johnson on it, what do the other 19 bowriders have for power and what kind of speed do you get?

The suspected culprit for the rot on the port side is the blidge outlet. http://www.myfishingpictures.com/img/103575.JPG

motor with low hours on it.
http://www.myfishingpictures.com/img/107382.jpg

see the spray rails at the water line?
http://www.myfishingpictures.com/img/103570.JPG

Transom partially cut out.
http://www.myfishingpictures.com/img/107381.jpg

Seacraft nameplate
http://www.myfishingpictures.com/img/103576.JPG
http://www.myfishingpictures.com/img/103574.JPG

The getting ready to sink piece of crap because it got rammed into to many docks the motor came off of.
http://www.myfishingpictures.com/img/105664.JPG