Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 09-27-2006, 10:09 PM
1bayouboy 1bayouboy is offline
Senior Member
 
Join Date: Jul 2006
Location: Mount Pleasant, SC
Posts: 592
Default Re: Pulling tsunami windshield frame



Each of the five frames has a slot in the bottom with studs
that can be inserted in hole and the slide along in the slot....My side frames each had four studs. The most forward one came through into the cabin. The other three were accessible under the gunnel. They just had lock washers and nuts on them. The front frames in front of the helm and passenger seats have what looks almost like a pipe that slides up into a bigger pipe on the side frame. It's a pretty snug fit....but if you took the 4 nuts off the side frame would slide up and back and would slide off the front frame. I'll post some better pics if you want....
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft