![]() |
|
#1
|
|||
|
|||
![]()
I fabricated my own and mounted it where the newer SeaCrafts have their’s
In this Picture you can see the deck for the tank and the hole for the scoop on the right side of this support. ![]() In this one is the finished job. I made it 32 Gal. ![]() FellowShip _______________________________________________ My motto: Just for the Grins |
#2
|
|||
|
|||
![]()
Fellow-ship.....I'm in the process of re-doing 2 thru hulls, 1 is transducer and 1 high speed pick-up for bait pump/washdown. I cut 3/4" plywood 6"x6", 45* the 4 edges and applied 3 coats of epoxy. I think this is similar to yours and some others I've seen. Do I really need to glass these down or would a generous amount of 4200 do??? The surface they're going on isn't as flat as I would like for glassing is my biggest concern.
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|