|
|
#2
05-18-2007, 05:01 PM
|
|||
|
|||
Re: How much can 1/4\" diameter diff in prop size make?
This is not meant to be the final word on the subject, but providing you have the clearance with regard to the cavitation plate plus 1/2" it should be doable. What I'm not positive about is the half inch. It may be slightly more. Your Yamaha dealer can probably provide you information regarding the minimum clearance requirement.
__________________
Getting home is more important than getting there! Plan accordingly! 
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Threaded Mode