Project Seafari Tuna-fication

[oldbluesplayer]

Time for an update -

Whle I had the trailer jacked up in the air, I went thru and replaced most bolts with stainless - while crawling around under there I noticed a few that were critically rotten, also pulled the hubs and replaced bearings / races, and while I was at it, I dropped the axle and moved it back three inches, to get an increase in tongue weight.

Now for the fun stuff - I picked up the outrigger side mounts, and a bimini top from our very own Ben, down in Florida. based on Nestors input on mounting the outrigger holders, I worked up some spacer blocks, shaped some 3/8" ply, then glassed it, and sanded it back to shape....

Alright, some pix - mostly just roughed out for now, need a bunch of finishing yet...









I'm scrambling - the tuna are in !!!

Bill