![]() |
#2
|
||||
|
||||
![]()
Rich
I have had good luck with the 3M Perfect-it III compound. Use the extra cut and then the finishing polish last. Mike @ Wildfire Marine gave me the heads up on this stuff. Work it in on slow speed until it hazes and then finish @ 1500 rpms. Then final spit & polish with the finishing paste. Get the feel and desired look first on the transom ![]() ![]()
__________________
![]() ![]() 1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck |
Thread Tools | Search this Thread |
Display Modes | |
|
|