Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 08-31-2007, 01:33 AM
muddywater muddywater is offline
Senior Member
 
Join Date: Nov 2003
Location: Abbeville, LA
Posts: 220
Default Re: throttle cable length for 20' sf

I just got home and measured my throttle and steering cables. The steering cable was exactly 12 ft plus an additional 1'3" for the attached bar that goes through the motor mount (I don't know if that is included or not). There was ZERO free play/extra cable on the steering cable. The throttle cable on the other hand was a different matter. While still attached to the motor and run under the deck, I pulled the entire attached throttle binnacle with cable all the way midway up the front deck. It was 13'plus probably add another foot for the curve it was making to go under the deck, so about 14'-15'. Those are probably both the original cables that came with the boat. The old Merc throttle cables are still good but the steering cable was shot and the ancient steering tilt system was frozen solid. The only reason I still had it at all was so I could measure it to order a new one.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft