62-Racer Stringers

[JohnB]

Nice
If you layed up all that epoxy in one day, you were working hard . Did it harden all the way so you could walk on between layers? or did you progressively put multiple layers down as you went (aka hot coat)?

I have been doing hot coats, and tend to like to work with epoxy that way. How much epoxy did you use?

[65Bowrider]

We did the hot coat process on the two outboard stringers one day, and then on another day, repeated the process for the two inboard stringers.
On the 2nd day, we had to lay plywood down over the two outboard stringers so we could reach the inboard ones without stepping in wet fiberglass. Yes, a few sore muscles & lots of help from Bushwacker (Thank you Denny!)
Between our transom & the stringers we used about 11.5 gals of epoxy.