Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-09-2008, 01:13 PM
stoney stoney is offline
Senior Member
 
Join Date: Oct 2003
Location: Toms River, N.J.& Elkton,Md
Posts: 148
Default Re: 23cc w/ 200HPDI Performance?

Peter,
I believe the mileage number. Not because of the navman F3100, which is on it's second sender and due to be trashed because they won't replace the non working display, but because I travel 60 miles fishing and put in 20 gallons somtimes 15 gallons for the last 3 years. I believe my boat is a lighter 23SF than most I've seen. I removed the livewell in the back relpaced the transom with Coosa 26, have a 100 gallon tank, and I think the foam is dry. Sitting at the dock the corner of the transom is only in the water 1/2" and the splash well drains are 3" above the water. Sitting next to Scott's boat mine sits 3" higher. It also feels lighter than scott's when riding in it, but that might be because he drives fast and me and my herniated disc's like slow rides. I also have seen the hull thickness cores that other people cut out of the hull and mine is not that thick, maybe 5/16" thick at most. So I have a light weight 23SF but I love it with the 200 Yami. I just need more fishing time.
http://i15.photobucket.com/albums/a3...2seacrafts.jpg
http://i15.photobucket.com/albums/a3...y/transom2.jpg
__________________
73 23 SF 2004 200 HP Yami OX66 Best boat I owned!
2002 29 Seavee twin 200 yami's
Reply With Quote
  #2  
Old 09-09-2008, 01:42 PM
Old'sCool Old'sCool is offline
Senior Member
 
Join Date: Jun 2006
Location: Charleston, SC
Posts: 2,122
Default Re: 23cc w/ 200HPDI Performance?

My thru-hull ducer hole cut-out is 5/8" thick. 1973...What year is yours??
Reply With Quote
  #3  
Old 09-09-2008, 01:58 PM
stoney stoney is offline
Senior Member
 
Join Date: Oct 2003
Location: Toms River, N.J.& Elkton,Md
Posts: 148
Default Re: 23cc w/ 200HPDI Performance?

I believe it is a 73. This is all I have for a nameplate,
http://i15.photobucket.com/albums/a3...y/NAMEPLTE.jpg
__________________
73 23 SF 2004 200 HP Yami OX66 Best boat I owned!
2002 29 Seavee twin 200 yami's
Reply With Quote
  #4  
Old 09-09-2008, 04:02 PM
Old'sCool Old'sCool is offline
Senior Member
 
Join Date: Jun 2006
Location: Charleston, SC
Posts: 2,122
Default Re: 23cc w/ 200HPDI Performance?

I can't read the HP number but I thought the old 23's were rated for 400. I still don't think a single 200 w/bracket would be "satisfying"
Reply With Quote
  #5  
Old 09-09-2008, 07:34 PM
peterb peterb is offline
Senior Member
 
Join Date: Dec 2004
Location: Montclair, Sandy Hook & Highbar Harbor, NJ
Posts: 1,148
Default Re: 23cc w/ 200HPDI Performance?

They are rated for up to 400 HP. The Savages are rated for up to 500 HP.
Reply With Quote
  #6  
Old 09-14-2008, 11:40 AM
salvagefirst salvagefirst is offline
Member
 
Join Date: Feb 2005
Posts: 82
Default Re: 23cc w/ 200HPDI Performance?

mine is a 89 23cc with a ttop i redone 3 years ago, rebuilt the transom with marine ply,recored the decks and cap with marine ply from the bottom side. But i still have the original 200 merc black max on it.it will top out at 41 by gps with a 19 prop. would love something less noisey and a little faster, but untill it shows me a rod i will stick with it.
Reply With Quote
  #7  
Old 09-14-2008, 09:34 PM
captbone captbone is offline
Member
 
Join Date: Feb 2003
Location: Long Island
Posts: 73
Default Re: 23cc w/ 200HPDI Performance?

I run a 25ft Bertram 1967 FBSF with a SINGLE 225hp Optimax swinging a labbed 15pitch Mirage plus. I fish with no less then 4 people and mostly full gear.

Ultra light with 1 person and 10 gallons of fuel, I just hit 40 mph on GPS.

With canvas up, 4 people, full fuel (80gallons), and gear, it will cruise at 24mph and top out at 36 mph.

This boat has a 10ft beam, and is over 25ft long with a flybridge. Planes off easily and stay on plane at 20mph.

Its all in the prop.

Just my 2 cents.




Reply With Quote
  #8  
Old 09-17-2008, 01:01 PM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default Re: 23cc w/ 200HPDI Performance?

Quote:
mine is a 89 23cc with a ttop i redone 3 years ago, rebuilt the transom with marine ply,recored the decks and cap with marine ply from the bottom side. But i still have the original 200 merc black max on it.it will top out at 41 by gps with a 19 prop. would love something less noisey and a little faster, but untill it shows me a rod i will stick with it.
What are your RPM's a WOT? Are you running a 2:1 or 1.87 lower?
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft