![]() |
#3
|
|||
|
|||
![]()
I originally ran into the same issue on my rebuild and i was told it would be fine. Just get some thin rubber mat from Home Depot and put between the tank and hull if you wanted. I talked to 3 different fiberglass/boat repair people and they all said the same.
I since have found and purchased one from the liquidators out of Florida that will fit on the supports, so now don't have that issue. good luck
__________________
SkipJake 1972 20 S.F , merc 97 150 offshore |
Thread Tools | Search this Thread |
Display Modes | |
|
|