Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 05-29-2009, 12:59 PM
seafari25 seafari25 is offline
Senior Member
 
Join Date: Oct 2008
Location: Eastern Canada...Wallace, Nova Scotia every chance I get
Posts: 237
Default Re: 25 Seafari Project

It is interesting that your scuppers are midship. I would think that your floor would have to taper from transom towards the bowls whereas mine tapers slightly to the transom.

I was interested in how it drains with the bow up because of a situation I got into last summer. I had 6 adults in the boat, the plugs were in, we were cruising a narrow channel on an overcast day. I had the rear camper top off. Within seconds it seemed, we had a storm cloud over us which dropped about 5 gallons of rain on us in the time it took the 4 ladies to run to the cabin(seconds). Some of the water followed them and dropped into the stepdown. At the same time I was popping the bow up and told my buddy to pull the plugs. The rain continued the same for at least 5 minutes or so before we got through in zero visibility conditions. Upon pulling the plugs, the water took no time to drain and continued to do so for our entire voyage.

So I guess my question is, under those conditions, would yours drain?
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:31 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft