![]() |
#4
|
|||
|
|||
![]()
In my little play house (man cave)
There is a 7.5HP 80 gallon Speedaire compressor. CFM is what you will be concerned with. 90 CFM should be the minimum for your choice. Running a DA will chew up alot of air FAST !!! Recovery is essential. Your choice of air tools IMO should be a good finish gun IE: Binks or Devilbiss. You need a "BS" gun for primer or PVA, Harbor Freight quality would be just fine for that gun. A "whiz wheel" as I call it for cutting up decking or any thing else that gets in its way is a must as well. Be sure to get a water seperating filter as well. Blowing the compressor off of all water in the tank is a must. Check Craigs List and other sources for deals that are a plenty every where today. ![]() ![]() See ya, Ken
__________________
See ya, Ken © |
Thread Tools | Search this Thread |
Display Modes | |
|
|