OUTBOARD MOTOR VIBRATION ONLY AT LOW SPEEDS

[Greno]

My 94 Johnson 175 vibrates when trimmed all the way down. The vibration is not violent or anything just a shimmy. I have no pin.

[pl99]

I agree Bobby soles is great they can run it on a machine and tell ya something. If prop is bad.. Heading their Tommorrow.. Need new prop for my yammy and merc Pretty nice and helpful
Chris

[fdheld34]

Hey Sandy...been hanging around.and watching and waiting ..taking my prop to Bobby Soles in Stuart tomorrow..at least I can keep it as a spare...Will try recond prop out this weekend...should run about 85 bucks..per phone quote.
I do have pin on my motor it is set on number 4?...hopefully this is the problem...not used to running a stainless prop...its a heavy sucker!!
Thanks all for the great input!
FRED

[gofastsandman]

Carbs are capped from the factory and I believe set up rich to keep us from blowing them. Rude. New gas is messing with your idle. Only very few additives are alcohol free.
Techron and Startron are 2. Techron runs nicely.
GFS