Plexiglass windsheild

[FELLOW-SHIP]

Hi jwclbi:

I made my own but used Lexan not Plexiglass. You can use a thinner sheet for Lexan and it will not crack and break. I used a heat gun and supported both sides with wood clamped together and then exposed approx 1” or 2” space in the middle and bent. It came out good and I have bent some other things since then.



Here is a thread on it.

http://www.classicseacraft.com/forum...=&fpart=1&vc=1




FellowShip

………………………….

Just for the Grins

Official Antique Classic SeaCraft Owner