I Need A Shrink !

[strick]

A few more shots of some of the work accomplished this past weekend.

Cap is bolted and riveted to the hull and liner. I was surprised how nicely they squeezed together. Calking is in place to seal the joint around the boat.



The rub rail on this boat is in fairly good shape. Somebody took the time to polish it and then bubble wrap it prior to storing it for 10 years. This boat really wants to go out side so it can show off its new paint job...






Making the parts for the step down. Instead of using wood like the original design I decided to just make some fiberglass inserts that will be screwed down when complete.


















I had one little spot were the resign leaked through






I went postal on the tower....started cutting stuff off until I liked the way it looked. I cut off 4 of the rod holders. The visor had a wake board boat look to it..... so off it went. There was a tripod thingy for a mast light that I hacked off as well. I'll grind down the remaining welds and re paint the thing.








strick