Prop for 300 Etec?

[LadyLuck]

Looking for some advice from other etec owners...i have a 23' CC with hermco bracket...300 HP Etec on the way and wanted to see what prop is suggested best for this application. looking for a balance of performance and stability....thanks for any advice!

[Capt Chuck]

I'm running a 14 3/4 x 17 SS Viper. 5600 - 5800 rpms trimmed out depending on sea conditions & fuel weight.

Most prop shops let you try different props before purchase. Big difference between SS & Alumin

[Entourage]

79 Sceptre 2006 225 etec 14 3/4x 17 SS Viper 5800-6000. Nice wholeshot too

[BLUEBOAT]

I have a 250 E-tec on a portabracket, prop is 3 blade ss 15x17, turns up to 5600rpm's.....

[jongolds]

I've got a 300 on a hermco bracket on my Tsunami. I'll give you the dimensions after checking this weekend but it's a 4 blade.

[SteveH]

Hey LadyLuck,

I know this is not responsive to your question, but PLEASE post some performance numbers once you get the 300 mounted and up and running. I may upgrade to a 300 etec at some point in the near future........ thanx

[LadyLuck]

Thanks for some of the info guys! STeve, i will let you know...hopefully will be in the water sometime in october..
LL