New Member with New Boat

[hermco]

Usually improperly mixed catalyst or not fully set before laminating. You can also use a mil gauge to help get the required thickness.

[everybody]

Been a while since I last posted. I've been trying to get the floor fair. The alligators gave me hell, but I figured it out and relize a little extra prep can save me hrs sand fixing etc.
Mold for under gunnel support

The Lay up

There will be two one for each side. These came out great and needed no fixing.

Hatch for bait well

I'mm glassing in the teak spray rails. One was really busted up and I didn't want to replace them.

I've faired the hull and will glass it, I glassed the inside face of the cap and still need to address the fish box.

[everybody]

I took the holidays off from the boat and finnaly got back to it this past week. I own a landscape company and Jan. is always slow/dead.
http://i221.photobucket.com/albums/d...0/DSC01790.jpg

[everybody]

I'm having trouble posting pics. Bar at top says HTML disabled. Any ideas?

[Blue_Heron]

I'm having trouble posting pics. Bar at top says HTML disabled. Any ideas?

You posted the link, not the image code. When you open your photobucket album, don't open the picture you want to post, just put your cursor over it and a drop down box will open. Move your cursor over the window at the bottom next to "IMG Code" and left click. It will copy the code. Then go back to your post and right click and select paste.

It's so easy an old dude can do it.

Dave

[everybody]

none of that works now. I've never had a problem till now?

[everybody]

Post deleted by st_augi_seacraft