1971 Seacraft 20' SF for sale

[9677]

The price is to catch attention. I wish I could say that it had some scientific basis but that it not the case.

[plusone876]

can you please post some pictures. i live on james island and am interested.

[9677]

reelescape is going to help me with the pictures. My server is down at work so I hope to send him the pictures tomorrow or earlier.

[Old'sCool]

reelescape is going to help me with the pictures. My server is down at work so I hope to send him the pictures tomorrow or earlier.

Sure will

[plusone876]

so? pictures? was the deck raised when the floor was redone? self-bailing cockpit? how are the scuppers oriented otherwise? gas tank status (old, new, material, etc.)?

[9677]

Pictures were sent to reelescape this am. The floor was replaced from the casting deck to the transom. Since the motor is on the bracket the boat sits lower in the water than if the motor was mounted directly on the transom. When the boat sits in the water over night I plug the scuppers and rely on the auto bilge to pump rain water out. When I troll I leave the scuppers open and it drains fine. The gas tank is the orginal aluminum 47 gallon tank. The tank was inspected when the floor was replaced and it is a solid as the day it was installed. Thanks for the inquiry.

[Old'sCool]

Pics from Tight_Ropes

[9677]

I sent the pictures to your email address this morning. Thanks again for helping the technologically challenged Seacraft owner.

[plusone876]

was the hull refurbished down to the stringers when you purchased the boat? any soft spots on the deck, transom, bracket/transom connection?

[9677]

The previous owner replaced the floor when the transom was enclosed. They went to all of the trouble to replace the floor but did it with regular plywood. In 2004 I had G-Crafts replace the floor from the casting deck to the transom. He used material, of which I don't remember the name, but it looks like marine plywood sanwiched between some sort of composite material. Deck is rock solid and I don't of any soft spots anywhere else. I hope this helps and I will get pictures on the site as soon as I can.

Thanks