20 potter seacraft, another one under the knife

[thegoggleeye]

Allright, i continued by filling whatever gap between the foam for the transom and the fiberglass with epoxy/ cabosil mix, than toped off with mat.
http://i1190.photobucket.com/albums/...eeye/045-1.jpg

http://i1190.photobucket.com/albums/...gleeye/046.jpg

http://i1190.photobucket.com/albums/...gleeye/047.jpg

http://i1190.photobucket.com/albums/...gleeye/048.jpg

http://i1190.photobucket.com/albums/...gleeye/049.jpg
thats the edges of the transom cabo'd in place with 2" strips of mat. next i went to the transom template on the roven woven to laminate the transom into place

http://i1190.photobucket.com/albums/...gleeye/106.jpg
http://i1190.photobucket.com/albums/...gleeye/108.jpg
http://i1190.photobucket.com/albums/...gleeye/109.jpg
keeping everything in place wasnt easy with heavy winds!
http://i1190.photobucket.com/albums/...gleeye/113.jpg
for the mating to the transom i decided to go out 4 inches on the sides and bottom of the boat
http://i1190.photobucket.com/albums/...gleeye/115.jpg
http://i1190.photobucket.com/albums/...gleeye/116.jpg
http://i1190.photobucket.com/albums/...gleeye/117.jpg
finished product
http://i1190.photobucket.com/albums/...gleeye/206.jpg
http://i1190.photobucket.com/albums/...gleeye/207.jpg
cleaning the transom for lamination:
http://i1190.photobucket.com/albums/...gleeye/208.jpg
http://i1190.photobucket.com/albums/...gleeye/210.jpg
http://i1190.photobucket.com/albums/...gleeye/211.jpg
http://i1190.photobucket.com/albums/...gleeye/212.jpg
the dress rehersal:
http://i1190.photobucket.com/albums/...gleeye/217.jpg
http://i1190.photobucket.com/albums/...gleeye/216.jpg
http://i1190.photobucket.com/albums/...gleeye/215.jpg
http://i1190.photobucket.com/albums/...gleeye/214.jpg