|
|
#6
06-08-2012, 02:57 AM
|
|||
|
|||
Yz congrats on the motah. ESD's point on the motor height will be very important to getting the most from the motor. You're theoretically 100 lbs overweight. Measure the anti-cavitation plate parallel to keel. Better be at least an 1-1/2" above the keel or you'll not get what you deserve from that motor. You might be able to go up another notch more without blowing out.
Good luck. Don't forget to post your perfomance numbers so others may learn from your experience. Cheers 
__________________
there's no such thing as normal anymore... 
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Threaded Mode