1985 SeaCraft 20 - New to the forum.

[REXGEAR]

thanks guys... more pics coming soon... Yea Jorge... we can probally do a Miami SeaCraft meet some time at one of the sand bars, or even something at the Keys.

[REXGEAR]

Here are some more photos


I want to change the layout of the Center Console... Any ideas?



That bottom paint needs to come off.


after patching up all battle scars with gelcoat i will go ahead and paint it some light blue, or green seafoam.

[REXGEAR]

I began some work on the SC.... i gelcoated some of the scars on the boat and i then moved to redo the CC doors... i made a prototype of the door just to get a feeling for it... ill redo the entire CC soon.

Present doors


Soon to be!

[jorgeinmiami]

Are you changing the sliding doors on the dash?

I like the doors for the lower console

[REXGEAR]

I am thinking about installing some flexiglass as a sliding door for the dashboard and remove the present black canvas... i am going to redo the enitre intrusment panel first.

[Mikem8560]

Originally Posted by REXGEAR

I am thinking about installing some flexiglass as a sliding door for the dashboard and remove the present black canvas... i am going to redo the enitre intrusment panel first.

Inwonder what the weight is of the 89 yami 200 looks loke your. Ost flots fine and not to heavy in the stern.
Im going to have to upgrade at some point and more hp then my 150 would be a good thing

Mine is a 82 but this is how it is with doors they slode to the right to veiw gauges and on the right side i built a storage box for tossing stuff

[REXGEAR]

Very nice... the door for the storage box... it slides to the left right?

[jorgeinmiami]

Originally Posted by Mikem8560

Inwonder what the weight is of the 89 yami 200 looks loke your. Ost flots fine and not to heavy in the stern.
Im going to have to upgrade at some point and more hp then my 150 would be a good thing

Mine is a 82 but this is how it is with doors they slode to the right to veiw gauges and on the right side i built a storage box for tossing stuff

That is the look I want as far as the dash and console door.

My question is on the dash... if I were to flush mount the Garmin VHF and Stereo would there be enough room behind for the door to slide closed?
I don't want the doors sticking out too much..... option would be to have a insert behind the doors to flush mount the equipment

I do like the console door the opens up 1/2 or if needed all the way

Now where do I get any of this?

[gofastsandman]

Todd`s Lures Rule`s!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I still have the shirts for your lures. Wear them on special times.

Hard to find NOS or OE. Keep your eyes open and be patient.

Or make them.

[Capt Chuck]

That is the look I want as far as the dash and console door.

My question is on the dash... if I were to flush mount the Garmin VHF and Stereo would there be enough room behind for the door to slide closed?

jorge

If you want the electronics to fit behind the slides, you need to build a flush mount backing plate that is countersunk. (measure your electronics to get the required depth) Configure something like an upside down cookie sheet otherwise the electronics will interfere with the left to right side operation.

I think you saw it before but here is what I built