Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-08-2012, 11:05 PM
FishStretcher FishStretcher is offline
Senior Member
 
Join Date: Dec 2010
Location: Greater Boston
Posts: 1,117
Default

For what it is worth- if you pay close attention to where you put weight, and limit the total weight, you can do ok without a bracket.

My waterline at the transom is 4" from the chine on port, 5" above the chine on starboard. The difference is a 60 lb kicker motor on the transom. About as good as Bushwacker when I am empty and his bracketed boat is full. Not as good, but not awful. I hope I plane out a little better, but I am not sure.

I have a light motor- 366 lb four stroke Yamaha 100. The 20 gallon fuel tank is in the console, as are the batteries. I have aluminum anchors. I have no livewell. The 150 qt cooler is forward of the console and doubles as a seat.

The modest power still goes 100+ miles on 20 gallons, and a 5 gallon spare tank is good for 25 more.

Just don't have 2 guys in an aft corner in the following sea. That is the situation where a bracket could be a lifesaver.

Last edited by FishStretcher; 10-08-2012 at 11:11 PM.
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft