|
|
#7
06-04-2013, 02:33 PM
|
|||
|
|||
After seeing Bigshrimpins bracket lift (floor jack adapter) I had to make me one. It will help a lot to have something adjustable under the bracket while test fitting it ect. I could not find a pipe or rod to fit the jack so I had to turn one down on the lathe. Once I got that done with that I welded it to a plate, drilled it so that I could screw it to the bottom of the jig I made yesterday. The jig is a small pallet with two bunk boards on the top for the bracket to rest on and the whole thing sits on the jacks arm in the same hole the cup uses.
    
__________________
Current SeaCraft projects: 68 27' SeaCraft Race boat 71 20' SeaCraft CC sf 73 23' SeaCraft CC sf 74 20' SeaCraft Sceptre 74 20' SeaCraft CC sf Last edited by flyingfrizzle; 06-05-2013 at 09:03 AM. 
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Threaded Mode