I must like punishing myself

[billythekid]

I decided to core the hull and cut the the liner to a make a gunnel with 6" sides, I took some white sided hardboard from home depot and put some mold release on it. Then reverse screwed it to the old rod locker opening I cut the screws off so I could glass up the inside. I laid 2 layers of mat for a skin coat then 1 layer of mat and one layer of 1708 on the inside that was an opening . I then mixed up some Dynaglass to fill the contour between the old and new and laid a layer of 1708 up over the new and down onto the underside of the cap.