i think i have boobed

[dave2400]

since starting this thread i have done a lot of serching other posts on brackets and there are a number off members saying that there is or was a thread on here that had a step by step instruction howe to make a bracket-pod i have looked through the archives with no luck can anybody tell me where it is or if it has been deleted thanks dave2400

[Blue_Heron]

There are two brackets built in this thread, the first one starting on page 4, post #37.

http://www.classicseacraft.com/commu...t=24103&page=4

The second one is later in the thread, but reading through the whole thing to find it will be worth your time. strick is quite talented at DIY, one-off fiberglass fabrication.
Dave

[dave2400]

Originally Posted by Blue_Heron

There are two brackets built in this thread, the first one starting on page 4, post #37.

http://www.classicseacraft.com/commu...t=24103&page=4

The second one is later in the thread, but reading through the whole thing to find it will be worth your time. strick is quite talented at DIY, one-off fiberglass fabrication.
Dave

thanks dave i have looked and read all the threads and posts on brackets on here but it is not just pics of the work i am after though i admit thay are grate and make me more determaned to do the job as it is my hope to build the bracket in 3/4 ply and then fiberglass inside and out in wovern woven or carbon fiber it is the mesurments i need in that thread if still here to see ...if you look at the link in the ancer post by mc gillcuddy you will sea the hull off a hunt 18 it is mutch the same as the seacraft witch is why i have joyned the forum the reason i whant to make the bracket mysailf is outher then the fact i done it to buy one from the US or OZ and have it shiped to the UK is a none starter on price and haveing a one off made in UK will be the same a.t.b dave