Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-31-2014, 09:52 PM
FishStretcher FishStretcher is offline
Senior Member
 
Join Date: Dec 2010
Location: Greater Boston
Posts: 1,117
Default

I suspect that if you go 4 blade you will be happier in the snotty new england stuff with a 15P. I know the (Solas Amita Aluminum) 17P 4 blade is too much for the F100, even with more lower unit reduction(2.31 verus 2.00). It will run it, but hole shot is poor. If you can get the (expensive) yamaha stainless 16P 4 blade, that might be the ticket.

A $100 solas amita 4blade 17P might be cheap enough to try and an ok back up prop if it was a little too much for a fully loaded boat.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft