interlux products

[CHANCE1234]

Thanks frizzle. i will just have to see how it goes. I know i have one part paint on the transom after i replaced the transom so i will sand that down or maybe just try going over it with the primer just to see if it works. worst case scenario, i waste a little primer and it acts as a striper (as intelux says it will) and will get the paint off for me. the temps up here this weekend look decent. They say 50 is the minimun and i should be near 60 on Cape cod this week. Thank you.

[fat2nawilly]

I used the one part on my 20' wellcraft's dog house and will never use it again. after some time it shrunk and cracked everywhere looks like crap now. If your gonna do anything i would use gel coat or go with awlgrip/alwcraft. gel coat is very easy to use and holds up well.