Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12  
Old 05-19-2014, 10:03 PM
kmoose kmoose is offline
Senior Member
 
Join Date: Jul 2006
Location: Ocala, Florida
Posts: 1,817
Default

I like the idea of the notched transom with a 30 inch df 300. The balance would be preserved and motor would be low enough to make it to the right depth. I have the same set up on my Tsunami with a df 250 on a small adjustable 10" bracket that would works well too. A big single just off the back wouldn't be any more than the pair of cast iron engine and drives that were in it.

I checked ebay and there are no 300s right now but I have seen some great deals on there with reasonably low hours and controls included for around $13k or less. The df 300 has forged everything and is a rock solid motor you can run on the cheapest pump gas with no issue. I also agree you could do it with the 250 as well and save $3k but for the price difference and fly by wire I would go big if you could squeeze it in your budget.
__________________
[b]The Moose is Loose !
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft