Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-20-2014, 10:28 AM
DonV DonV is offline
Senior Member
 
Join Date: Jul 2004
Location: Apollo Beach or Islamorada
Posts: 3,488
Send a message via ICQ to DonV
Default

My two cents........if you get the EFI you will love it UNTIL you go the the gas pump, ask me how I know! Then in a year or two you will say "I want to re-power with new technology" to cut my gas bills. In the end, do it right the first time! Then you won't have to go through the justification process over and over......I know, I do it every time I go out!
Reply With Quote
  #2  
Old 05-20-2014, 10:45 AM
GameOnSalmon GameOnSalmon is offline
Recovered
 
Join Date: May 2014
Posts: 137
Default

Quote:
Originally Posted by Islandtrader View Post
I know people think this way all the time...but folks cruise across the ocean on a single engine. Hell I cruised from the Great Lakes to the Gulf Of Mexico on one engine. And yes at times I was way off shore.
Islandtrader - My Bad i should have elaborated more... and I just realized as i was typing this, in the Northwest here you tons of single engine Boats... But here we all run kicker motors 8hp to 15hp 4 strokes depending on the size of boat. From Previous experience i have just come to loath the I/O personal preference only. Agree that the newer technology Single Engine plus Seatow is all a guy needs, Then toss in a Great Kicker motor and ur set. My boat will only see 20 to 40 miles offshore about 6 to 10 days a year for Tuna... Outside of that, I can get it too the ramp most times without to much effort.

Thanks for the Clarification of my post..
Robert

Quote:
Originally Posted by DonV View Post
My two cents........if you get the EFI you will love it UNTIL you go the the gas pump, ask me how I know! Then in a year or two you will say "I want to re-power with new technology" to cut my gas bills. In the end, do it right the first time! Then you won't have to go through the justification process over and over......I know, I do it every time I go out!
Donv - It's not so much as what I exactly want, My Ideal engine would be the Etec 250 H.O. used or not, but even then still looking at $10,000 plus.

The Merc EFI 250 or a Yami 250 ox66 is gonna be a huge upgrade over the 92 Johnson 200 Looper I have been running for fuel economy. That looper on its best day got about 1 mpg if it was running good.

I am already dumping serious money into this boat... I can live this year with a 250 EFI and the Pumps vs digging up another $5,000 for newer Technology. It will beat the hell out of owning a boat that sits here for a year getting a Make Over ... I wanna Fish and Hunt out of this Machine.

Thanks for the Reply though.

Robert
Reply With Quote
  #3  
Old 05-20-2014, 12:33 PM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default

That west coast seashore is way way more unforgiving than the east coast. Gotta have the kicker. 4 stroke kicker / trolling motors save a lot of fuel.



Reply With Quote
  #4  
Old 05-20-2014, 01:25 PM
GameOnSalmon GameOnSalmon is offline
Recovered
 
Join Date: May 2014
Posts: 137
Default

Quote:
Originally Posted by Bigshrimpin View Post
That west coast seashore is way way more unforgiving than the east coast. Gotta have the kicker. 4 stroke kicker / trolling motors save a lot of fuel.
Bigshrimpin... Love that shot of the Oregon Coast there and yes I could not agree more... Lots of debate between one Big Engine vs Twins... Out here you seen a Lot of 225 and 250 Yamaha Engines the coastal crowd loves the 4 strokes.... On ocassion you see the big 2 bangers like the ox66 and the merc efi and the Etec 250 h.o.

Every last one of them will have a 8hp Yamaha High Thrust kicker or a 15 Hp Yamaha kicker with Extra Long shaft on them... The dreaded day you gotta come in from 15 miles out on the kicker sucks... but I am really leaning towards a 15 HP Yamaha Xtra Long High Thrust and a single 250 EFI or OX66 motor for now. I can get that done together for under 6,000 total...

Toss in a porta bracket and this should work... Huge difference between 17" of setback and 30" fixed bracket...

Unless someone chimes in with a great reason to forgo this I am going to end up being the Seafari 25' Pig Tester I guess....

Just so tough when there is no data on this boat to speak of outside of the I/O situation...

Appreciate the feedback my friend... Do you have any other Ideas?

Robert
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft