Finished restoring a 75 sf 20

[Peanut]

I got only the hatch from a guy in Miami who restored seacrafts,unfortunately he passed away about 8 months ago and I was never able to ask him what this hatch came off of. It is a perfect fit. The rest of it I fabricated out of coosa and fiberglass. Thanks for all the nice comments. The boat turned out well because of this website and all of its members. I split the boat both sides between rub rail and inner wall and removed all plywood and replaced with coosa and fiberglass end all back together. Did not remove inner liner or cap completely. Adding the stripes back in floor as original was too much work and would not do it again