![]() |
|
#1
|
|||
|
|||
![]()
23' Sceptre with 30" offset bracket.
|
#2
|
|||
|
|||
![]()
Riley... I read on another site.. Tsunami with F350 pulling right at 60mph on the Transom.
I am thinking you should be able to Prop that bugger and Double check the Running height of the AV plate. On the 23' I just sold with a 30" Armstrong Bracket I was (Cough Cough) 5.8 Inches high with a Mirage Prop on a 250 Rude. My First thought is...that boat should be doing 55 or close too it with that set up. Worth a look if you already haven't done that. Robert |
#3
|
|||
|
|||
![]() Quote:
Only speaking for myself, I don't put a lot of thought or effort into top speed prop selection or cavitation plate height. Cruise speed efficiency in seas and being low enough not to blow out on a hard turn rank way above squeezing a couple of extra knots out of her in the channel.
__________________
[b]The Moose is Loose ! |
#4
|
|||
|
|||
![]()
The first time I ran the boat by myself I got 55 out of it but it only had 10 gallons in it. It felt like it would keep going too but started getting a little squirrelly!! The torque in the motor is unreal and it will throw you out of the back of the boat if your not careful.
Off subject; Moose, what does that AJ weigh? |
#5
|
|||
|
|||
![]()
If I remember correctly he was 128...... Almost exactly the same weight I have put on since I shot him.
__________________
[b]The Moose is Loose ! |
#6
|
|||
|
|||
![]()
Fish of a lifetime there man!!
|
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|